Allyn, WA 98524 Building a Glued Lapstrake Tirrik
The completed Tirrik
Intro: Introduction
1: Getting started
2: Lofting and setting up the molds
3: Planking complete
4: Details of the interior
5: Odds and ends
6: Fitting floorboards
7: Shaping the centerboard and fitting out the motorwell
8: Spars and rigging
9: Fore and aft hatches
10: Ready for paint
11: Finishing details
12: Completed at last and ready for launch
13: Ridgepole
14: The launching
1: Getting started
2: Lofting and setting up the molds
3: Planking complete
4: Details of the interior
5: Odds and ends
6: Fitting floorboards
7: Shaping the centerboard and fitting out the motorwell
8: Spars and rigging
9: Fore and aft hatches
10: Ready for paint
11: Finishing details
12: Completed at last and ready for launch
13: Ridgepole
14: The launching
Introduction
Hot on the heels of "Freya", the Caledonia Yawl we just completed, our next commission is another of Iain Oughtred's designs, Tirrik.
© 2006 by Grapeview Point Boat Works. All rights reserved.